This entity will display the engine temperature. This entity will show you how much fuel you have left in your tank. The directional indicators/turn signals will automatically start to twinkle when you steer left or right. The rear light will automatically be turned on when the engine is on and you use the brakes or put in reverse. The front light will automatically be turned on when the engine is on. You can use the car horn by pressing the primary fire button while the engine is on and you are in the connected vehicle. If you are replacing the radio music with your own music, remember that the music file has to be in MP3 format and be the same name as the replaced music file. You can play your own favorite music on the radio by replacing theģ files in this directory ".garrysmod\addons\Easy Engine\sound\Easy_Engine_Sounds\Radio".
To shut off the radio you have to cycle to the first channel (channel 0), you will hear a sound when it's off and the music will stop. When you are in the connected seats you can cycle between 8 different radio channels.
This part will only work if you have a battery connected to the engine. You connect the electronic devices just like all other parts (directly to the engine). Notice that you don't connect the electronics with the battery. Connect the battery by touching the engine with it. The boat engine will also emit bubbles from the propeller and the boat engine also uses different sounds.Ī battery is required for all the electronics (car horn, car radio, front light, rear light, dir indicators, fuel gauge, thermometer) to work. The difference between the boat engine and the other engines is that it will only work under water when it's submerged otherwise it's the same. For some reason, the airboat engine goes faster than the EP2 engine, guess it has something to do with weight to force ratio, the code is the same. It is merely included so people who don't have EP2 can use this entity pack. Don't try to turn the engine on before it's welded to a vehicle! Use turbo by pressing the Sprint key, the turbo will be enabled if you have installed the turbo on the engine. You can control the engine using your movement keys ( WASD by default). You start the engine by pressing the jump key while you are in the connected vehicle. Airboat seat or pod) to the engine before you can start it. Instructions How to connect things Īutomatically connect the device.
0 kommentar(er)
